AirSense 10 Autoset with HumidAir and ClimateLineAir Tube

ResMed's First "Smart" CPAP

The all-new CPAP machine from ResMed is also the first "Smart" CPAP. Its advanced features give you the ability to monitor and manage your CPAP therapy with ease. The built in cellular modem makes it easy to get sleep reports and to have your settings adjusted. The Airsense 10 is also the first CPAP system to incorporate wireless cloud computing, it is the first CPAP machine that offers personalized and customizable support, and it is the first system with advanced sleep onset detection. 

Whisper Quiet

The quiet Easy-Breathe motor makes for a peaceful environment for you and your bed partner.

AirView

Using AirView™, you can access nightly therapy data. Easy Breathe or your doctor can troubleshoot remotely and change device settings remotely.

Expiratory Relief Pressure

Expiratory pressure relief (EPR) maintains the optimal treatment pressure during inhalation and reduces pressure during exhalation, increasing comfort.

AutoSet Response

AutoSet Response comfort setting offers gentler pressure increases and a smoother night’s sleep. Built-in ambient light sensor adjusts brightness of the screen based on the light in the room and turns off automatically.

Meets FAA Requirements

The AirSense™ 10 and AirCurve™ 10 devices meet Federal Aviation Administration (FAA) requirements for all phases of air travel, so you can safely take your device on board as carry-on luggage.

Compatible with International Power Sources

The AirSense™ 10 and AirCurve™ 10 devices are compatible with all international power sources. All you need is a set of plug adapters and you can use your device anywhere that has a power outlet. 

What's in the Box?

• Auto-Adjusting CPAP Machine
• Integrated HumidAir Heated Humidifier
• Standard Humidifier Chamber
• ClimateLineAir Tubing
• Power Supply and Cord
• Travel Bag
• Standard Filter (Installed)
• Filter Cover
• Patient Manual 

Product Specifications:

Weight Machine with Water Chamber: 2.75 lbs (44 oz.)

Dimensions Machine with Water Chamber: 10.04 in L x 4.57 in W x 5.91 in H

Weight Standard Chamber: 0.54 lb

Weight Machine with Side Cover (Without Water Chamber): Approx. 2.452 lbs

Dimensions Machine with Side Cover (Without Water Chamber): Approx. 8 in L x 4.57 in W x 5.91 in H

Dimensions Travel Bag: 13.24 in L x 10 in W x 5 in H

Weight Travel Bag Alone: 1.18 lb

Weight Machine with Humidifier; Power Supply and Cord; ClimateLineAir Tubing; Travel Bag: Approximately 5.25 lbs

Water Chamber Capacity: 380 mL (12.8 oz)

Weight 90W Power Supply, Cord and Plug: 1.29 lb

Dimensions - 90W Power Supply Only (Not including Cord or Plug): 5 1/2 in x 1 7/8 in x 1 1/4 in

AC Input Range - 90W Power Supply: 100 - 240V, 50 - 60Hz, 1.0 - 1.5A, Class II

DC Output - 90 W Power Supply: 24V --- 3.75A

Typical Power Consumption: 53W (57VA)

Peak Power Consumption: 104W (108VA)

Operating Pressure: 4 - 20 cm H2O

Length ClimateLineAir Tubing: 6 feet

Materials ClimateLineAir Tubing: Flexible Plastic

Materials Water Chamber: Injection Molded Plastic, Stainless Steel, Silicone Seal

Materials Standard Filter: Polyester non-woven fiber

Operating Temperature: 41° F - 95° F (5° C - 35° C)

Storage and Transport Temperature: -4° F - 140° F (-20° C - 60° C)

Operating Humidity: 10% - 95% Relative Humidity, non-condensing

Storage and Transport Humidity: 5% - 95% relative Humidity, non-condensing

Operating Altitude: Sea Level - 8500 Feet (2,591 M); Air pressure range 1013 hPa - 738 hPa

Maximum Temperature Heating Plate: 154° F (68° C)

Maximum Temperature Cut Out: 165° F (74° C)

Maximum Gas Temperature: Less than or Equal to 106° F (41° C)

IEC 60601-1:2005 Classification: Class II (Double Insulation), Type BF, Ingress protection IP22

Machine Warranty: 2 Years

Patient Weight: Greater than 66 lbs

AirSense 10 User Guide